بررسی و مقایسه تاثیر میکروسیلیس و نانوسیلیس بر خواص رئولوژی و مکانیکی بتن

[1]. Kazemi, M.; Nazari Kalehjoub, H., (2015), "Study of the simultaneous effects of microsilica and water to cement ratio on the compressive strength of concrete", the Third International Conference on Applied Research in Civil Engineering, Architecture and Urban Management (In Persian).

[2]. skandari, H.; Hosseini, S., A., (2015), "Corrosion behavior of concrete rebars containing microsilica and air bubbles using TOEFL test", Third International Conference on Applied Research in Civil Engineering, Architecture and Urban Management (In Persian).

[3]. Heydari, A.; Reza Shahreza, M., (2015), "Evaluation of compressive strength of self-compacting concrete containing nanosilica in sulfate and water environment", Third International Conference on Applied Research in Civil Engineering, Architecture and Urban Management (In Persian).

[4]. Sadeghi, R., (2004), "Application of nanostructured materials in the construction industry", the 11th conference of civil students across the country, Hormozgan province (In Persian).

[5]. Al-Amoudi, O.S.B; Maslehuddin, M and Al-Mana, A.I, (1993), "Prediction of long-term corrosion resistance of plain and blended cement concretes", Materials Journal, 90(6): pp.  564-570.

[6]. Qale Noei, M .; Khodabakhshian, A.; Asadi Shamsabadi, A., (2015), "The effect of using marble powder and microsilica wastes as a substitute for cement on the mechanical properties of concrete", the Third International Conference on Applied Research in Civil Engineering, Architecture and Urban Management (In Persian).

[7]. Ramsden, J. Essentials of nanotechnology, Free Book. Net, (2009), Ramoden and ventus publishing.

[8]. Madan Doost, R.; Alipour Khomeini, A.; Ghasemzadeh, S., H., (2015), "Evaluation of engineering properties of self-compacting copper-containing concrete with different percentages of microsilica and nanosilica", Third International Conference on Applied Research in Civil Engineering, Architecture and Urban Management (In Persian).

[9]. Tarighat, A.; Yazdani, S., (2013), "Properties of wollastonite and its effect on the mechanical properties of concrete", Fifth Annual National Iranian Concrete Conference, Tehran (In Persian).

[10]. Qing, Y; Zenan, Z; Deyu, K and C. Rongshen, (2007), "Influence of nano-sio2 addition on properties of hardened cement paste as compared with silica fume," Construction and Building Materials, Vol. 21, No. 3, pp. 539-545.

[11]. Byung, W.J; Chnge, H.K; Ghi, H.T; Jong, B.P, "Characteristics of cement mortar with nano silica particles", Construction and Building Materials, Vol. 21, pp. 1351-1353, 2007.

[12]. Lin, K.L; Change, W.C; Lin, D.F; Luo, H.L; Tsai, M.C, (2008), "Effects of nano silica and different ash particle sizes on sludge ash", 88, pp. 708-714.

[13]. Siddique, R., (2011), Utilization of silica fume in concrete, Review of hardened properties, Resources, Conservation and Recycling, 55, pp. 923-932.

[14]. Brock, Sh., (2016), "Study of permeability of lightweight concrete containing Leca, perlite and nanosilica in chlorate environment", Master Thesis in Civil Engineering, Mohaghegh Ardabili University (In Persian).

[15]. Mohammadi, S., (2010), "Using nanosilica additive to produce concrete with special properties", Master Thesis in Civil Engineering, Tafresh University (In Persian).

[16]. Priyadarshana, T; Dissanayake, R; Mendis, P, (2015), "Effects of Nano Silica, Micro Silica, Fly Ash and Bottom Ash Compressive Strength of Concrete", Journal of Civil Engineering and Architecture, 9, pp. 1146-1152.

[17]. sancak, E; Sari, Y.D, (2008), "Effects of elevated temperature on compressive strength and weight loss the light-weight concrete with Silica fume and superplasticizer", Osman Simsek, Cement & Concrete Composites, 30, pp. 715-721.

[18]. Ramezanianpour, A.; Moravej Jahromi, M.; Modi, F., (2009), "The effect of nanosilica on mechanical properties and durability of concrete compared to microsilica", 8th International Congress of Civil Engineering, Shiraz University, Shiraz (In Persian).

[19]. Ajay, V; Rajeev, C; Yadav, R.K, (2012), "Effect of micro silica on the strength concrete with ordinary Portland cement", Research Journal of Engineering Sciences, Vol. 1, pp. 2278-2281.

[20]. Rahmani, K; Shamsai, A; Saghafian, B; Saber, P, (2012), "Effect of Watter and Cement Ratio on Compressive Strenght and Abrasion of Microsilica Concrete", Middle-East Journal of Scientific Research 12 (8), pp. 1056-1061.

[21]. Turk, K; Turgut, P; Karatas, M; Benli, A, (2010), "Mechanical Properties of Self-Compacting Concrete with Silica Fume/Fly Ach", the 9 International Congress on Advances in Civil Ingineering, Karadeniz Technical University, Trabzon, Turkey.

[22]. Mazloom, M; Ramezanianpour, A.A; Brooks, J.J, (2004), "Effect of silica fume on mechanical properties of high-strength concrete", Cement & Concrete Composites, 26, pp.  347-357.

[23]. Nuainia, B .; Sangi, M .; Hossein Ali Beigi, M., (2013), "The effect of microsilica on the long-term behavior of self-compacting concrete", Journal of Civil and Environmental Engineering, Vol. 43, No. 2, pp. 90-83 (In Persian).

[24]. Ghasemi, J.; Hosseini Vaez, R., (2017), "Laboratory study of the effect of nanosilica on the strength behavior of concrete", the fourth national conference on recent achievements in civil engineering, architecture and urban planning (In Persian).

[25]. Hashemi, S.H.; Mohammadi, M., (2015), "Investigation of the effect of nanosilica on self-compacting lightweight concrete in fresh and hardened state", the first national conference on new concrete technologies (In Persian).

[26]. ASTM C150-99a, "Standard specification for Portland cement", American Society for Testing and Materials, Annual Book of ASTM Standard, 1999.

[27]. ASTM C128-12, "Standard Test Method for Density, Relative Density (Specific Gravity), and Apsorption of Coarse Aggregate", American Society for Testing and Materials, Annual Book of ASTEM Standard, 2012.

[28]. ASTM C127-12, "Standard Test Method for Density, Relative Density (Specific Gravity), and Apsorption of Fine Aggregate", American Society for Testing and Materials, Annual Book of ASTEM Standard, 2012.

[29]. ASTM C136-06, "Standard test method for sieve analysis of fine and coarse aggregates", American Society for Testing and Materials, Annual Book of ASTM Standard, 1984.

[30]. Mostofinejad, D., (2015), Technology and Concrete Mixing Design, Arkan Danesh Publications, 42nd Edition, 384 pages (In Persian).

[31]. Jafari Zadeh, M.; Sohrabi, M.; Morvati, J., (2010), "Study of mechanical properties of concrete containing pozzolanic powder of Bash Aghaj and nanosilica", Fifth Congress of Civil Engineering, Ferdowsi University of Mashhad (In Persian).

[32]. Hosseini, P., (2010), "The effect of nanosilica replacement with cement on the microstructure and strength properties of cement paste and mortar for repair and improvement of concrete structures", Internal Journal of Concrete Association, Year 9, No. (In Persian).

[33]. ASTM C494/C494M-99a, "Standard specification for chemical admixtures for Concrete", American Society for Testing and Materials, 1999.

[34]. Concrete Pass Company Catalog, p. 64 (In Persian).

[35]. ASTM C192, "Standard practice for making and curing concrete test specimens in laboratory", American Society for Testing and Materials, Annual Book of ASTM Standard, 1988.

[36]. ACI Committee 304, "Guide for Measuring, Mixing, Transporting and Placing Concrete (ACI 304R-00)," American Concrete Institute, Farmington Hills, MI, p. 39, 2000.

[37]. ASTM C143/C143 M-10, "Standard test method for slump of Concrete", American Society for Testing and Materials, Annual Book of ASTM Standard, 1978.

[38]. ISIRI 3203-6, "Determination of density test method fresh Concrete", Institute of Standard and Industrial Research of Iran, 2007.

[39]. BS EN 12390-03, “Compressive strength of test specimens", British Standard Institution, Testing hardened concrete, part.3, 2009.

[40]. ASTM C496-M11, “Standard test method for Splitting Tensile Strength of Cylindrical Concrete Specimens", American Society for Testing and Materials, Annual Book of ASTM Standard, 2011.

[41]. ASTM C496-02, “Standard test method for Static Modulus of Elasticity of Concrete in Compression", ASTM, West Conshohocken, PA, p. 5, 2002.

[42]. Adili, A.; Akbarzadeh Shahrestanak, Z., (2017), "The effect of combination of microsilica and nanosilica in concrete using native materials of Iranshahr city on the compressive strength of concrete", the sixth national conference and the second international conference on new materials and structures in civil engineering (In Persian).

[43]. Moghneinejad, M.; Rostami, M.; Akrami, A.; Morvati, J., (2013), "The effect of nanosilica and microsilica composition on the compressive strength of concrete", 7th National Congress of Civil Engineering, Shahid Nikbakht Faculty of Engineering, Zahedan (In Persian).