تاثیر واکنش قلیایی - سیلیسی (ASR) بر خواص مکانیکی و دوام بتن‌های حاوی سرباره

[1] Garcia-Diaz, E., Riche, J., Bulteel, D., & Vernet, C. (2006). Mechanism of damage for the alkali–silica reaction. Cement and concrete research, 36(2), 395-400.‏ https://doi.org/10.1016/j.cemconres.2005.06.003

[2] Scrivener, K. L., & Kirkpatrick, R. J. (2008). Innovation in use and research on cementitious material. Cement and concrete research, 38(2), 128-136.‏ https://doi.org/10.1016/j.cemconres.2007.09.025

[3] Islam, M. S., & Akhtar, S. (2013). A critical assessment to the performance of alkali–silica reaction (ASR) in concrete. Canadian Chemical Transactions, 1(4), 253-266.‏

[4] Kagimoto, H., & Kawamura, M. (2011). Measurements of strain and humidity within massive concrete cylinders related to the formation of ASR surface cracks. Cement and concrete research, 41(8), 808-816.‏

[5] Sims, I., & Poole, A. B. (Eds.). (2017). Alkali-aggregate reaction in concrete: A world review. CRC Press.‏

[6] Bouikni, A., Swamy, R. N., & Bali, A. (2009). Durability properties of concrete containing 50% and 65% slag. Construction and Building Materials, 23(8), 2836-2845.‏

[7] Siddique, R. (2014). Utilization (recycling) of iron and steel industry by-product (GGBS) in concrete: strength and durability properties. Journal of Material Cycles and Waste Management, 16, 460-467.‏

[8] Folliard, K. J., Barborak, R., Drimalas, T., Du, L., Garber, S., Ideker, J., ... & Thomas, M. D. (2006). Preventing ASR/DEF in new concrete (No. FHWA/TX-06/0-4085-5).‏

[9] Hooton, R. D. (1991). New aggregate alkali-reactivity test methods.‏

[10] Thomas, M. D. A., Fournier, B., & Folliard, K. J. (2012). Selecting measures to prevent deleterious alkali-silica reaction in concrete: rationale for the AASHTO PP65 prescriptive approach (No. FHWA-HIF-13-002). United States. Federal Highway Administration.‏

[11] Rivard, P., Bérubé, M. A., Ollivier, J. P., & Ballivy, G. (2003). Alkali mass balance during the accelerated concrete prism test for alkali–aggregate reactivity. Cement and Concrete Research, 33(8), 1147-1153.‏ https://doi.org/10.1016/S0008-8846(03)00020-6

[12] Esposito, R., & Hendriks, M. A. N. (2012). Degradation of the mechanical properties in ASR-affected concrete: Overview and modeling. SSCS 2012: Numerical Modeling Strategies for Sustainable Concrete Structures, Aix en Provence, France, 29 May-1 June 2012.‏

[13] Ghiasvand, E., Rezaei, Z., Mohammadi, H., Ayyoubi, M., & Dehghani, S. (2023). Evaluation of long-term properties of products containing alkali-activated slag exposed to alkali-silica reaction by mechanical parameters. Materials in Civil Engineering.

[14] Zhou, C., Li, K., & Han, J. (2012). Characterizing the effect of compressive damage on transport properties of cracked concretes. Materials and structures, 45(3), 381-392.‏

[15] Chung, D. D. (2003). Damage in cement-based materials, studied by electrical resistance measurement. Materials Science and Engineering: R: Reports, 42(1), 1-40.‏ https://doi.org/10.1016/S0927-796X(03)00037-8

[16] Ghiasvand, E., Mohammadi, H., Rezaei, Z., Ayyoubi, M., & Dehghani, S. (2023). Evaluation of the durability of concretes containing alkali-activated slag exposed to the alkali-silica reaction by measuring electrical resistivity. Construction and Building Materials, 367, 130094.‏ https://doi.org/10.1016/j.conbuildmat.2022.130094

[17]         Flores, J., Kamali, M., & Ghahremaninezhad, A. (2015). Electrical resistivity measurement to study alkali-silica-reaction cracking in mortar. In Forensic Engineering 2015 (pp. 230-241).‏ https://doi.org/10.1061/9780784479711.023

[18]         Khajehnouri, Y., Rivard, P., Chouteau, M., & Bérubé, C. L. (2020). Validation of complex electrical properties of concrete affected by accelerated alkali-silica reaction. Cement and Concrete Composite, 113, 103660.‏ https://doi.org/10.1016/j.cemconcomp.2020.103660

[19] Duchesne, J., & Bérubé, M. A. (2001). Long-term effectiveness of supplementary cementing materials against alkali–silica reaction. Cement and concrete research, 31(7), 1057-1063.‏ https://doi.org/10.1016/S0008-8846(01)00538-5

[20] Kwon, Y. J. (2005). A study on the alkali-aggregate reaction in high-strength concrete with particular respect to the ground granulated blast-furnace slag effect. Cement and concrete research, 35(7), 1305-1313.‏ https://doi.org/10.1016/j.cemconres.2004.09.021