ارزیابی مقاومت پیوستگی آرماتورهای پلیمری تقویتی الیاف شیشه در تیرهای بتن‌آرمه

[1]. Aly, R., Benmokrane, B. and Ebead, U., “Tensile Lap Splicing of Fiber-Reinforced Polymer Reinforcing Bars in Concrete”, ACI Structural Journal, 103(6): pp. 857-864, 2006.

[3]. Kazakevich, T., Mamedov, S., Nizhegorodtsev, D. and Klevan, V., “Improving the reliability of FRP bars tests by increasing the adhesive strength in specimen anchor”, IOP Conf. Series: Materials Science and Engineering 896, 2020.

[4]. Wu, Q., Xiao, S. and Iwashita, K., “Experimental study on the interfacial shear stress of RC beams strengthened with prestressed BFRP rod”, Results in Physics, 10, pp. 427–433, 2018.

[5]. Zhao, D., Pan, J., Zhou, Y., Sui, L. and Ye, Z., “New types of steel-FRP composite bar with round steel bar inner core: mechanical properties and bonding performances in concrete,” Construction and Building Materials, 242, pp. 118062, 2020.

[6]. Hadhood, A., Mohamed, H.M., Benmokrane, B., Nanni, A. and Shield, C.K., “Assessment of design guidelines of concrete columns reinforced with glass fiber-reinforced polymer bars”, ACI Structural Journal, 116(4), pp. 193–207, 2019.

[7]. Esfahani, M.R., Rakhshanimehr, M. and Mousavi, S.R., “Bond strength of lap-spliced GFRP bars in concrete beams”, Journal of Composites for Construction, 17, pp.314-323, 2013.

[8] Papakonstantinou, C.G., Balaguru, P.N. and Auyeung, Y., “Influence of FRP confinement on bond behavior of corroded steel reinforcement,” Cement and Concrete Composites, 33(5), pp. 611–621, 2011.

[9] Ding, Y., Ning, X., Zhang, Y., Pacheco-Torgal, F.  and Aguiar, J.B., “Fibres for enhancing of the bond capacity betweenGFRP rebar and concrete,” Construction and Building Materials, 51, pp. 303–312, 2014.

[10]. Minkwan Ju, M. and Oh H., “Experimental assessment on the flexural bonding performance of concrete beam with GFRP reinforcing bar under repeated loading”, International Journal of Polymer Science, 2015.

[13]. He, Z. and Tian, G.W., “Reliability-based bond design for GFRP-reinforced concrete”. 44, pp. 1477–1489, 2011.

[14]. Quayyum, S., “Bond Behaviour of Fibre Reinforced Polymer (FRP) Rebars in Concrete” MS thesis, University of British Columbia, 2010.

[15]. American Concrete Institute (ACI) Committee 440, “Guide for the design and construction of structural concrete reinforced with FRP bars”, ACI 440.1R-06, Farmington Hills, MI, 2006.

[16]. Tighiouart, B., Benmokrane, B. and Mukhopadhyaya, P., “Bond strength of glass FRP rebar splices in beams under static loading”, Construction and Building Materials, 13, pp. 383-392, 1999.

[17]. Mosley, C.P., Tureyen, A.K. and Frosch, R.J., “Bond strength of nonmetallic reinforcing bars.” ACI Structural Journal, 105(5), pp. 634-642, 2008.

[18]. Harajli, M., and Abouniaj, M., “Bond Performance of GFRP Bars in Tension: Experimental Evaluation and Assessment of ACI 440 Guidelines”, Journal of Composites for Construction, 14(6). 2010.

[19]. Aly, R.S.M., “Experimental and Analytical Studies on Bond Behaviour of Tensile Lap Spliced FRP Reinforcement Bars in Concrete,” PhD thesis, University of Sherbrooke, Sherbrooke, Quebec, Canada, 2005, 194 pp.

[21]. American Concrete Institute (ACI) Committee 318, “Building Code Requirements

for Structural Concrete.” ACI 318-19, 2019.

[22]. ACI Committee 440, “Guide for the design and construction of structural concrete reinforced with FRP bars (ACI 440.1R-06)”, American Concrete Institute, Farmington Hills, MI, 2015.

[23]. ACI Committee 440, “Guide for the design and construction of concrete reinforced with FRP bars (ACI 440.1R-03)”, American Concrete Institute, Farmington Hills, MI, 2003.

[24]. CAN/CSA S806-02, “Design and construction of building components with fibre reinforced polymers”, Canadian Standards Association, Rexdale, Ontario, Canada, 2012.

[25]. CAN/CSA S6-06, “Canadian highway bridge design code”, Canadian Standards Association, Rexdale, Ontario, Canada, 2006.