ارزیابی کارایی بتن متخلخل ساخته شده از کربن فعال ضایعاتی در حذف آلاینده های روانابهای سطحی

[1] Organization, W.H., Facts and figures: Water, sanitation and hygiene links to health. Geneva: WHO, 2004.

[2] Müller, A., et al., The pollution conveyed by urban runoff: A review of sources. Science of the Total Environment, 2020. 709: p. 136125. https://doi.org/10.1016/j.scitotenv.2019.136125.

[3]Kim, J.-Y. and J.J. Sansalone, Event-based size distributions of particulate matter transported during urban rainfall-runoff  events. Water research, 2008. 42(10-11): p. 2756-2768. https://doi.org/10.1016/j.watres.2008.02.005

[4] Sánchez-Mendieta, C., J.J. Galán, and I. Martinez-Lage, Physical and Hydraulic Properties of Porous Concrete. Sustainability, 2021. 13(19): p. 10562. https://doi.org/10.3390/su131910562

[5] Tennis, P.D., Leming, M.L. and Akers, D.J. (2004) Pervious Concrete Pavements. Technical Report, EB30202. Portland Cement Association, Skokie, and National Ready Mixed Concrete Associated, Silver Spring.

[6] Moretti, L., P. Di Mascio, and C. Fusco, Porous concrete for pedestrian pavements. Water, 2019. 11(10): p. 2105. https://doi.org/10.3390/w11102105

[7] Moretti, L. and G. Loprencipe, Climate change and transport infrastructures: State of the art. Sustainability, 2018. 10(11): p. 4098. https://doi.org/10.3390/su10114098

[8] Mohammadi, EL., Najafi, EK., Ranjbar, PZ., Payan, M., Chenari, RJ. and Fatahi, B., Recycling industrial alkaline solutions for soil stabilization by low-concentrated fly ash-based alkali cements, Construction and Building Materials, 2023,393:132083. https://doi.org/10.1016/j.conbuildmat.2023.132083

[9] Hosseinjani, MH., Ranjbar, PZ., Lashteh Neshaei, MA., Ranjbar, MM. and Nassiraei, H., Investigation of Alkaline Reaction of Dredged Caspian Sea Marine Sand to Make Concrete in Marine Environment and Ports,Concrete Research, 2022, 15(1), pp.5-22. https://doi.org/10.22124/JCR.2021.20990.1530

[10] Ranjbar, PZ., Talebi, H., Mousazadeh, R. and Ghorbani, M., Investigating the synergistic effect of using cement, polymer slurry, and recycled tire fibers in improving the mechanical and geotechnical properties of dune sand,Concrete Research, 2022, 15(3):31-33. https://doi.org/10.22124/JCR.2022.19642.1500

[11] Bansal, R.C. and M. Goyal, Activated carbon adsorption. 2005: CRC press. https://doi.org/10.1201/9781420028812

[12] Hu, X., Dai, K., & Pan, P. , Investigati on of engineering properties and filtration characteristics of porous asphalt concrete containing activated carbon. Journal of Cleaner Production, 2019, 209, 1484-1493. https://doi.org/10.1016/j.jclepro.2018.11.115

[13] Justo-Reinoso, I., Srubar III, W. V., Caicedo-Ramirez, A., & Hernandez, M. T. (2018). Fine aggregate substitution by granular activated carbon can improve physical and mechanical properties of cement mortars. Construction and Building Materials, 164, 750-759. https://doi.org/10.1016/j.conbuildmat.2017.12.181

[14] Moses, M. T., Thomas, L. B., Scaria, J., & Dev, G. V. (2019). Prospective benefits of using activated carbon in cement composites-An overview. Technology, 10(04),946-953. https://doi.org/10.34218/IJARET.10.3.2019.027

[15] Justo-Reinoso, I., Caicedo-Ramirez, A., Srubar III, W. V., & Hernandez, M. T. (2019). Fine aggregate substitution with acidified granular activated carbon influences fresh-state and mechanical properties of ordinary Portland cement mortars. Construction and Building Materials, 207, 59-69. https://doi.org/10.1016/j.conbuildmat.2019.02.063

[16] Cui, J., et al., A green route for preparation of low surface area SiO 2 microspheres from wheat straw ash with activated carbon and NPK compound fertilizer as by-products. RSC advances, 2015. 5(98): p. 80238-80244. https://doi.org/10.1039/c5ra14622d

[17] Valentín-Reyes, J., et al., Adsorption mechanisms of hexavalent chromium from aqueous solutions on modified activated carbons. Journal of environmental management, 2019. 236: p. 815-822. https://doi.org/10.1016/j.jenvman.2019.02.014

[18] Bezerra, M.A., et al., Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta, 2008. 76(5): p. 965-977. https://doi.org/10.1016/j.talanta.2008.05.019

[19] Esfahanian, M., Nikzad, M., Najafpour, G., Choreyshi, A.A., 2013. Modeling and optimization of ethanol fermentation using saccharomyces cerevisiae: response surface methodology and artificial neural network. Chem. Ind. Chem. Eng. 19 (2), 241–252. https://doi.org/10.2298/CICEQ120210058E

[20] Liu Y, Zheng Y, Wang A. Response Surface Methodology for Optimizing Adsorption Process Parameters for Methylene Blue Removal by a Hydrogel Composite. Adsorption Science & Technology.2010 ;28(10):913-922. https://doi.org/10.1260/0263-6174.28.10.913

[21] Daneshi, A., Younesi, H., Ghasempouri, S.M., Sharifzadeh, M., 2010. Production of poly‐3‐hydroxybutyrate by Cupriavidus necator from  corn syrup: statistical modeling and optimization of biomass yield and volumetric productivity. J. Chem. Technol. Biotechnol. 85, 1528–1539.  https://doi.org/10.1002/jctb.2463

[22] ACI Committee 522. 2006. Pervious Concrete, ACI 522R-06 Report.

[23] ASTM C642, A., Standard test method for density, absorption, and voids in hardened concrete. ASTM, ASTM International, 2013.

[24] ASTM C1760-12, Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021), ASTM International, West Conshohocken, PA, 2012.