بررسی آزمایشگاهی و عددی تیر بتن مسلح مقاوم سازی شده با ورق های CFRP

[1] ACI Committee 440. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures: ACI 440.2 R-17. AmericanConcrete Institute, 2017.

[2] American Concrete Institute. Committee 440. Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars: ACI 440.1 R-06. American Concrete Institute, 2006.

[3] Saliha H, Bennetta C, Matamorosb A. Evaluation of novel combined CFRP-steel retrofit for repairing distortion-induced fatigue, Journal of Constructional Steel Research, 182: 106642, 2021.

[4] Eslamia A, Shayeghb H R, Moghavema A, Ronaghc H R, Experimental and analytical investigations of a novel end anchorage for CFRP flexural retrofits, Composites Part B: Engineering, 176: 107309, 2019.

[5] Falah Hassana H, et al, Flexural performance of concrete beams reinforced by gfrp bars and strengthened by cfrp sheets, Case Studies in Construction Materials, 13: e00417, 2020.

[6] Ali H, Assih J, Li A, Flexural capacity of continuous reinforced concrete beams strengthened or repaired by CFRP/GFRP sheets, International Journal of Adhesion and Adhesives, 104:102759, 2021.

[7] Elbana A, Junaid M T, Determination of flexural capacity for GFRP-reinforced concrete beams retrofitted using external CFRP sheet, Structures, 27: 1384-1395, 2020.

[8] Benmokrane B, Masmoudi R. Flexural response of concrete beams reinforced with FRP reinforcing bars. Struct J., 1996;93:46–55.

[9] M'Bazaa I, Missihoun M, Labossiere P. Strengthening of reinforced concrete beams with CFRP sheets. First International Conference on Composites in Infrastructure National Science Foundation National Sicence Foundation, 1996.

[10] Aghabozorgi, P., Khaloo, A. Numerical investigation of the effects of compression GFRP reinforcement on the flexural strength and ductility of reinforced concrete beams. Journal of Concrete Structures and Materials, 2018. 5(1), 31-45.

[11] Sharifi, Y., khojastefar, E. A method to assess capacity and deflection of flexural reinforced concrete members retrofitted with FRP. Journal of Concrete Structures and Materials, 2018. 3(2), 77-88.

[12] Baderan, M., Varaste Poor, H. An expremental method to prevent fast fracture phenomenon in bending of carbon and glass reinforced concrete beams. Journal of Concrete Structures and Materials, 2016. 1(2), 73-82.

[13] Talebzadeh, M., Rostamian, M. Modeling of reinforced beams with FRP sheet and its validation with laboratory results, Conference on Civil Engineering, Architecture and Urban Planning of the Islamic World, 2018.

[14] Kok S Leong, Effect Of Beam Size & FRP Thickness On Interfacial Shear Stress Concentration & Failure Mode In FRP Strengthened Beam, MS Thesis, Singapor, 2017.

[15] Pancha S., Norris T, Saadatmanesh H, Ehsani M. Improving The Serviceability Of Concrete Beams Using Carbon Fiber Reinforced Polymer (CFRP) Sheets. Federal Highway, 2016.

[16] Podoloski S., Taqieddin ZN Elasto-Plastic And Damage Modeling Of Reinforced Concrete, Ph.D. Dissertation, Dept. Civil & Environmental Engineering, Louisiana State Univ. Baton Rouge LA, 2018.

[17] Jarival M., Obaidat YT, Heyden S, Dahlblom O "The Effect Of CFRP And CFRP/ Concrete Interface Models When Modeling Retrofitted RC Beams With FEM" Journal Of Composite Structures, 2018.

[18] Najafgholipour, S.M. Dehghan, M. Khani, A. Heidari (2018) .The performance of lap splices in RC beams under inelastic reversed cyclic loading. Structures24 July, 2018.07.011.

[19] Garsia G., Heyden S, Dahlblom O "The Effect Of Cfrp And Cfrp/ Concrete Interface Models When Modeling Retrofitted Rc Beams With Fem" Journal Of Composite Structures. 2019.

[20] ZHANG, Yafang, et al. Experimental and numerical study on multi-impact performance of pre-damaged beams strengthened with CFRP. Engineering Structures, 2023, 285: 116034.‏

[21] ACI 318-19. Building Code Requirements for Structural Concrete. Reported By ACI Committee 318.