تعداد نشریات | 31 |
تعداد شمارهها | 748 |
تعداد مقالات | 7,108 |
تعداد مشاهده مقاله | 10,240,013 |
تعداد دریافت فایل اصل مقاله | 6,897,733 |
Risk assessment and its management for environmental pollution in oil refinery using FMEA approach | ||
Caspian Journal of Environmental Sciences | ||
دوره 21، شماره 3، مهر 2023، صفحه 603-622 اصل مقاله (1.16 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22124/cjes.2023.6939 | ||
نویسندگان | ||
Alexander N. Semin1؛ Marina V. Faminskaya2؛ Vadim V. Ponkratov* 3؛ Oksana N. Mikhayluk1؛ Galina N. Shapoval4 | ||
1Ural State Mining University, Yekaterinburg, Russia | ||
2Russian State Social University, Moscow, Russia | ||
3Financial University Under the Government of the Russian Federation, Moscow, Russia | ||
4Rostov State Medical University, Rostov-on-Don, Russia | ||
چکیده | ||
The main goal of petrochemical industries is to produce petrochemical and chemical products as well as by-products of oil and oil derivatives along with natural gas, which have the potential to cause adverse effects on the environment due to the activities and processes. This study was conducted with the aim of investigating the environmental, safety and health risks in the gas condensate storage tanks in an oil refining company. In order to prevent accidents in process industries and considering the increasing development in all aspects of these industries, it is necessary to identify the risks in the processes and evaluate their risk management. In this study, in order to assess quantitative risk, the FMEA method was developed to provide an approach with high user power, followed by management of risks that can be understood by all personnel, so that, its results can be used to analyze incidents. The results showed that the bowtie method provides a complete, and understandable graphic structure of the incident scenarios along with all the components of the incident and a good connection with the components of a management system. Research implications were to facilitate the implementation of the bowtie method, hence, the active bowtie software was introduced and some of its features were examined. It was also a case study on the LPG unit of the refinery. The results showed the existence of a purposeful and at the same time, adaptable management. In addition, the most important petrochemical risks included air pollution, reduction of water quality and jeopardizing the public health of the region. Therefore, in order to reduce or eliminate the risks and factors that cause environmental risks, it is suggested that the inspection and monitoring periods, according to the identified risks, should be among the most important goals of the management plans. | ||
کلیدواژهها | ||
Environmental risk assessment؛ Bowtie diagram؛ Fault tree؛ Event tree؛ FMEA | ||
مراجع | ||
Ahumada, CB, Ávila Filho, S & Cayres, ÉC 2019, Analysis of reliability mapping in refining industry: identification of critical regions and interventions in complex production systems. In: Mary K O'Connor process safety symposium. Proceedings 2019. Mary Kay O'Connor Process Safety Center.
Aydin, N, Seker, S & Şen, C 2022, A new risk assessment framework for safety in oil and gas industry: Application of FMEA and BWM based picture fuzzy MABAC. Journal of Petroleum Science and Engineering, 219: 111059.
Bhatia, K, Khan, F, Patel, H & Abbassi, R 2019, Dynamic risk-based inspection methodology. Journal of Loss Prevention in the Process Industries, 62: 103974.
Calvo, MF, Pérez, MÁS & Fernández, FB 2020, Development of a dynamic risk assessment and control methodology for industrial accidents. Doctoral dissertation, UNED, Universidad Nacional de Educación a Distancia (España).
Chin, HH, Varbanov, PS, Klemeš, JJ, Benjamin, MFD & Tan, RR 2020, Asset maintenance optimization approaches in the chemical and process industries: A review. Chemical Engineering Research and Design, 164: 162-194.
Fu, S, Yu, Y, Chen, J, Han, B & Wu, Z 2022, Towards a probabilistic approach for risk analysis of nuclear-powered icebreakers using FMEA and FRAM. Ocean Engineering, 260: 112041.
Ivančan, J & Lisjak, D 2021, New FMEA Risks ranking approach utilizing four fuzzy logic systems. Machines, 9: 292.
Landucci, G, D’Aulisa, A, Tugnoli, A, Cozzani, V & Birk, AM 2016, Modeling heat transfer and pressure build-up in LPG vessels exposed to fires. International Journal of Thermal Sciences, 104: 228-44.
Lee, J, Cameron, I & Hassall, M 2019, Improving process safety: What roles for Digitalization and Industry 4.0? Process Safety and Environmental Protection, 132: 325-339.
Liu, J, Wang, D, Lin, Q & Deng, M 2023, Risk assessment based on FMEA combining DEA and cloud model: A case application in robot-assisted rehabilitation. Expert Systems with Applications, 214: 119119.
Mandych, IA, Bykova, AV & Gaiman, OB 2022, Features of assessing the investment attractiveness of high-tech projects. Russian Technological Journal, 10: 75-86, https://doi.org/10.32362/2500-316X-2022-10-2-75-86.
Mkrtchyan, L, Straub, U, Giachino, M, Kocher, T & Sansavini, G 2022, Insurability risk assessment of oil refineries using Bayesian Belief Networks. Journal of Loss Prevention in the Process Industries, 74: 104673.
Mobaseri, M, Mousavi, SN & Mousavi Haghighi, MH 2021, Causal effects of population growth on energy utilization and environmental pollution: A system dynamics approach. Caspian Journal of Environmental Sciences, 19: 601-618.
Sethi, A & Chutima, P 2022, The application of FMEA to study the critical barriers to deploying carbon capture and storage in a Thai petroleum refinery. International Journal of Oil, Gas and Coal Technology, 31: 137-165.
Taleb Berrouane, M & Pasman, H 2022, Integrated dynamic risk management in process plants. In Methods in Chemical Process Safety, 6: 525-560.
Wang, X, Wang, S & Xu, Q 2022, Simultaneous production and maintenance scheduling for refinery front-end process with considerations of risk management and resource availability. Industrial & Engineering Chemistry Research, 61: 2152-2166.
Wari, E, Zhu, W & Lim, G 2023, Maintenance in the Downstream Petroleum Industry: A Review on Methodology and Implementation. Computers & Chemical Engineering, 108177. | ||
آمار تعداد مشاهده مقاله: 757 تعداد دریافت فایل اصل مقاله: 682 |