Data Fusion Techniques for Fault Diagnosis of Industrial Machines: A Survey

[1] Chen, H., B. Jiang, and N. Lu, Data-driven incipient sensor fault estimation with application in the inverter of high-speed railway. Mathematical Problems in Engineering, 2017. 2017.

[2] Huo, Z., et al., Incipient fault diagnosis of roller bearing using optimized wavelet transform based multi-speed vibration signatures. IEEE Access, 2017. 5: p. 19442-19456.

[3] Salim, M. and M.J. Khosrowjerdi, Data-driven H_infinity Controller/Detector Design for a Quadruple Tank Process. Journal of Control Engineering and Applied Informatics, 2017. 19(1): p. 3-14.

[4] Munikoti, S., et al., Data-driven approaches for diagnosing incipient faults in dc motors. IEEE Transactions on Industrial Informatics, 2019. 15(9): p. 5299-5308.

[5] Tao, X., et al., Bearings fault detection using wavelet transform and generalized Gaussian density modeling. Measurement, 2020. 155: p. 107557.

[6] Cheng, C. et al., Data-driven incipient fault detection and diagnosis for the running gear in high-speed trains. IEEE Transactions on Vehicular Technology, 2020. 69(9): p. 9566-9576.

[7] Chen, H., et al., Data-driven and deep learning-based detection and diagnosis of incipient faults with application to electrical traction systems. Neurocomputing, 2020. 396: p. 429-437.

[8] Zonta, T., et al., Predictive maintenance in the industry 4.0: A systematic literature review. Computers & Industrial Engineering, 2020. 150: p. 106889.

[9] Carvalho, T.P., et al., A systematic literature review of machine learning methods applied to predictive maintenance. Computers & Industrial Engineering, 2019. 137: p. 106024.

[10] Boström, H., et al., On the definition of information fusion as a field of research. 2007, Institutionen för kommunikation och information.

[11] Abidi, M.A., and R.C. Gonzalez, Data fusion in robotics and machine intelligence. 1992: Academic Press Professional, Inc.

[12] Fu, C., et al. Research and implementation of fast identity registration system based on audio-visual fusion. 2017 IEEE 7th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER). 2017. IEEE.

[13] Sala, D.A., et al. Positioning control on a collaborative robot by sensor fusion with liquid state machines. in 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). 2017. IEEE.

[14] Meng, T., et al., A survey on machine learning for data fusion. Information Fusion, 2020. 57: p. 115-129.

[15] Kumar, D.P., T. Amgoth, and C.S.R. Annavarapu, Machine learning algorithms for wireless sensor networks: A survey. Information Fusion, 2019. 49: p. 1-25.

[16] Lin, H. and S. Sun, An overview of multi-rate multisensor systems: Modelling and estimation. Information Fusion, 2019. 52: p. 335-343.

[17] Chen, Z. and W. Li, Multisensor feature fusion for bearing fault diagnosis using sparse autoencoder and deep belief network. IEEE Transactions on Instrumentation and Measurement, 2017. 66(7): p. 1693-1702.

[18] Lei, Y., et al., Applying machine learning to machine fault diagnosis: A review and roadmap. Mechanical Systems and Signal Processing, 2020. 138: p. 106587.

[19] Lei, Y., et al., A deep learning-based method for machinery health monitoring with big data. Journal of Mechanical Engineering, 2015. 51(21): p. 49-56.

[20] Azamfar, M., et al., Multisensor data fusion for gearbox fault diagnosis using 2-D convolutional neural network and motor current signature analysis. Mechanical Systems and Signal Processing, 2020. 144: p. 106861.

[21] Jiang, Q., et al., new fault recognition method for rotary machinery based on information entropy and a probabilistic neural network. Sensors, 2018. 18(2): p. 337.

[22] Haidong, S., et al., Intelligent fault diagnosis of rolling bearing using deep wavelet auto-encoder with extreme learning machine. Knowledge-Based Systems, 2018. 140: p. 1-14.

[23] Purushotham, V., S. Narayanan, and S.A. Prasad, Multi-fault diagnosis of rolling bearing elements using wavelet analysis and hidden Markov model-based fault recognition. Pdt & E International, 2005. 38(8): p. 654-664.

[24] Lei, Y., et al., A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mechanical systems and signal processing, 2013. 35(1-2): p. 108-126.

[25] Abdelkader, R., A. Kaddour, and Z. Derouiche, Enhancement of rolling bearing fault diagnosis based on the improvement of empirical mode decomposition denoising method. The International Journal of Advanced Manufacturing Technology, 2018. 97(5): p. 3099-3117.

[26] Wang, X.-B., Z.-X. Yang, and X.-A. Yan, Novel particle swarm optimization-based variational mode decomposition method for the fault diagnosis of complex rotating machinery. IEEE/ASME Transactions on Mechatronics, 2017. 23(1): p. 68-79.

[27] Zhang, S. et al., Bearing fault diagnosis based on variational mode decomposition and total variation denoising. Measurement Science and Technology, 2016. 27(7): p. 075101.

[28] Wang, L., et al., Time-frequency analysis based on ensemble local mean decomposition and fast kurtogram for rotating machinery fault diagnosis. Mechanical Systems and Signal Processing, 2018. 103: p. 60-75.

[29] Shi, P., X. Ma, and D. Han, A weak fault diagnosis method for rotating machinery based on compressed sensing and stochastic resonance. Journal of Vibroengineering, 2019. 21(3): p. 654-664.

[30] Li, Z. et al., A multi-parameter constrained potential underdamped stochastic resonance method and its application for weak fault diagnosis. Journal of Sound and Vibration, 2019. 459: p. 114862.

[31] Wang, H. and P. Chen, Fault diagnosis for a rolling bearing used in a reciprocating machine by adaptive filtering technique and fuzzy neural network. WSEAS Transactions on Systems, 2008. 7(1): p. 1-6.

[32] Liao, Z., et al., An automatic filtering method based on an improved genetic algorithm—with application to rolling bearing fault signal extraction. IEEE Sensors Journal, 2017. 17(19): p. 6340-6349.

[33] Long, J., et al., Applications of fractional lower order S transform time-frequency filtering algorithm to machine fault diagnosis. PloS one, 2017. 12(4): p. e0175202.

[34] Liu, Z.C., L.W. Tang, and L.J. Cao. A feature extraction method for rolling bearing’s week fault based on Kalman filter and FSK. in Applied Mechanics and Materials. 2014. Trans Tech Publ.

[35] Zhang, K., et al., Feature selection for high-dimensional machinery fault diagnosis data using multiple models and radial basis function networks. Neurocomputing, 2011. 74(17): p. 2941-2952.

[36] Kohavi, R. and G.H. John, Wrappers for feature subset selection. Artificial intelligence, 1997. 97(1-2): p. 273-324.

[37] Osman, H., M. Ghafari, and O. Nierstrasz. Automatic feature selection by regularization to improve bug prediction accuracy. In 2017 IEEE Workshop on Machine Learning Techniques for Software Quality Evaluation (MaLTeSQuE). 2017. IEEE.

[38] Žvokelj, M., S. Zupan, and I. Prebil, Multivariate and multiscale monitoring of large-size low-speed bearings using ensemble empirical mode decomposition method combined with principal component analysis. Mechanical Systems and Signal Processing, 2010. 24(4): p. 1049-1067.

[39] Wang, H. et al., Research on rolling bearing state health monitoring and life prediction based on PCA and Internet of things with multi-sensor. Measurement, 2020. 157: p. 107657.

[40] Li, J., et al., multi-source feature extraction of rolling bearing compression measurement signal based on independent component analysis. Measurement, 2021. 172: p. 108908.

[41] Shakya, P., M.S. Kulkarni, and A.K. Darpe, A novel methodology for online detection of bearing health status for naturally progressing defect. Journal of Sound and Vibration, 2014. 333(21): p. 5614-5629.

[42] Dong, Z., et al. Transformer fault diagnosis based on factor analysis and gene expression programming. In 2011 International Conference on Advanced Power System Automation and Protection. 2011. IEEE.

[43] Li, X., et al., Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor. Control Engineering Practice, 2018. 72: p. 177-191.

[44] Zhou, Y., et al., Rolling bearing fault diagnosis using transient-extracting transform and linear discriminant analysis. Measurement, 2021. 178: p. 109298.

[45] Hoang, D.-T. and H.-J. Kang, A survey on deep learning based bearing fault diagnosis. Neurocomputing, 2019. 335: p. 327-335.

[46] Xu, Z., C. Li, and Y. Yang, Fault diagnosis of rolling bearing of wind turbines based on the variational mode decomposition and deep convolutional neural networks. Applied Soft Computing, 2020. 95: p. 106515.

[47] Che, C., et al., Domain adaptive deep belief network for rolling bearing fault diagnosis. Computers & Industrial Engineering, 2020. 143: p. 106427.

[48] Li, C., et al., Exploring temporal representations by leveraging attention-based bidirectional LSTM-RNNs for multi-modal emotion recognition. Information Processing & Management, 2020. 57(3): p. 102185.

[49] LeCun, Y. and Y. Bengio, Convolutional networks for images, speech, and time series. The handbook of brain theory and neural networks, 1995. 3361(10): p. 1995.

[50] Krizhevsky, A., I. Sutskever, and G.E. Hinton, Imagenet classification with deep convolutional neural networks. Advances in neural information processing systems, 2012. 25.

[51] Szegedy, C., et al. Going deeper with convolutions. in Proceedings of the IEEE conference on computer vision and pattern recognition. 2015.

[52] Simonyan, K. and A. Zisserman, Very deep convolutional networks for large-scale image recognition. arXiv preprint arXiv:1409.1556, 2014.

[53] He, K., et al. Deep residual learning for image recognition. in Proceedings of the IEEE conference on computer vision and pattern recognition. 2016.

[54] Angelou, M., et al., Graph-based multimodal fusion with metric learning for multimodal classification. Pattern Recognition, 2019. 95: p. 296-307.

[55] Li, C., et al., A Bayesian approach to consequent parameter estimation in probabilistic fuzzy systems and its application to bearing fault classification. Knowledge-based systems, 2017. 129: p. 39-60.

[56] Yu, J., Health condition monitoring of machines based on hidden Markov model and contribution analysis. IEEE Transactions on Instrumentation and Measurement, 2012. 61(8): p. 2200-2211.

[57] Shatnawi, Y. and M. Al-Khassaweneh, Fault diagnosis in internal combustion engines using extension neural network. IEEE Transactions on Industrial Electronics, 2013. 61(3): p. 1434-1443.

[58] Unal, M., et al., Fault diagnosis of rolling bearings using a genetic algorithm optimized neural network. Measurement, 2014. 58: p. 187-196.

[59] Li, C., et al., Multimodal deep support vector classification with homologous features and its application to gearbox fault diagnosis. Neurocomputing, 2015. 168: p. 119-127.

[60] Zheng, J., H. Pan, and J. Cheng, rolling bearing fault detection and diagnosis based on composite multiscale fuzzy entropy and ensemble support vector machines. Mechanical Systems and Signal Processing, 2017. 85: p. 746-759.

[61] Pan, Z., et al., A two-stage method based on extreme learning machine for predicting the remaining useful life of rolling-element bearings. Mechanical Systems and Signal Processing, 2020. 144: p. 106899.

[62] Li, L., et al., Exploration of classification confidence in ensemble learning. Pattern recognition, 2014. 47(9): p. 3120-3131.

[63] Bonab, H. and F. Can, Less is more: A comprehensive framework for the number of components of ensemble classifiers. IEEE Transactions on neural networks and learning systems, 2019. 30(9): p. 2735-2745.

[64] Xu, G., et al., Bearing fault diagnosis method based on deep convolutional neural network and random forest ensemble learning. Sensors, 2019. 19(5): p. 1088.

[65] Wang, Z.-Y., C. Lu, and B. Zhou, Fault diagnosis for rotary machinery with selective ensemble neural networks. Mechanical Systems and Signal Processing, 2018. 113: p. 112-130.

[66] Yu, G., et al., Semi-supervised classification based on random subspace dimensionality reduction. Pattern Recognition, 2012. 45(3): p. 1119-1135.

[67] Sinha, J.K. and K. Elbhbah, A future possibility of vibration-based condition monitoring of rotating machines. Mechanical Systems and Signal Processing, 2013. 34(1-2): p. 231-240.

[68] Zhao, X., M. Jia, and M. Lin, Deep Laplacian Auto-encoder and its application into imbalanced fault diagnosis of rotating machinery. Measurement, 2020. 152: p. 107320.

[69] Meng, Z., et al., An enhancement denoising autoencoder for rolling bearing fault diagnosis. Measurement, 2018. 130: p. 448-454.

[70] Kong, X., et al., A multi-ensemble method based on deep auto-encoders for fault diagnosis of rolling bearings. Measurement, 2020. 151: p. 107132.

[71] Liang, P., et al., Compound fault diagnosis of gearboxes via multi-label convolutional neural network and wavelet transform. Computers in Industry, 2019. 113: p. 103132.

[72] Zhang, Y., et al., An enhanced convolutional neural network for bearing fault diagnosis based on time–frequency image. Measurement, 2020. 157: p. 107667.

[73] Chen, Z., K. Gryllias, and W. Li, Mechanical fault diagnosis using convolutional neural networks and extreme learning machine. Mechanical systems and signal processing, 2019. 133: p. 106272.

[74] Shao, H., et al., Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing. Mechanical Systems and Signal Processing, 2018. 100: p. 743-765.

[75] Zhang, W., X. Li, and Q. Ding, Deep residual learning-based fault diagnosis method for rotating machinery. ISA transactions, 2019. 95: p. 295-305.

[76] Du, Y., et al., Fault diagnosis under variable working conditions based on STFT and transfer deep residual network. Shock and Vibration, 2020. 2020.

[77] Sun, R.-B., et al., Planetary gearbox spectral modeling based on the hybrid method of dynamics and LSTM. Mechanical Systems and Signal Processing, 2020. 138: p. 106611.

[78] Wang, B., et al., Recurrent convolutional neural network: A new framework for remaining useful life prediction of machinery. Neurocomputing, 2020. 379: p. 117-129.

[79] Yu, K., et al., A multi-stage semi-supervised learning approach for intelligent fault diagnosis of rolling bearing using data augmentation and metric learning. Mechanical Systems and Signal Processing, 2021. 146: p. 107043.

[80] García-Holgado, A. and F.J. García-Peñalvo, Validation of the learning ecosystem metamodel using transformation rules. Future Generation Computer Systems, 2019. 91: p. 300-310.

[81] Vázquez-Ingelmo, A., et al., A meta-model integration for supporting knowledge discovery in specific domains: a case study in healthcare. Sensors, 2020. 20(15): p. 4072.

[82] Huang, M., Z. Liu, and Y. Tao, Mechanical fault diagnosis and prediction in IoT based on multi-source sensing data fusion. Simulation Modelling Practice and Theory, 2020. 102: p. 101981.

[83] Jing, L., et al., An adaptive multi-sensor data fusion method based on deep convolutional neural networks for fault diagnosis of planetary gearbox. Sensors, 2017. 17(2): p. 414.