DNA-damage in blood of welders occupationally exposed to welding fume using comet assay

Akca, E & Gursel, A 2016, Solid state welding and application in aeronautical industry. Periodicals of Engineering and Natural Sciences, 4: 1-8.

Aksu, İ, Hatice, GA, Gökçe, TMB, Servet, İ, Engin, T, Nursen, B 2019, Assessment of DNA damage in welders using comet and micronucleus assays. Mutation Research/Genetic Toxicology and Environmental Mutagenesis, 843: 40-45.

AL Amier, FH, Abdulhay, HS & Mohsen, SM 2019, Measurement of the concentration of lead in gasoline stations and in air battery factories and their effect of cytogenic and haematological parameters in workers. Ecology, Environment and Conservation, 25: 188-193.

Albert, RV 1996, Fume generation in gas metal arc welding. PhD Dissertation, Department of Chemical Engineering, University of New Hampshire, USA, 192 p.

Alhesnawi, ASM, Al-Ashbal, HN, Abed Almjalawi, BS 2022, Assessment of the pollution degree for some heavy elements in street dust around the shrine of Imam Hussein, Kerbala, Iraq. Caspian Journal of Environmental Sciences, 20: 385-391.

AWS (American Welding Society) 2009, Standard welding terms and definitions. In: Committee TA, 12 ed. Miami: American Welding Society.

Azqueta, A & Collins, A 2013, The essential comet assay: a comprehensive guide to measuring DNA damage and repair. Archives of Toxicology, 87: 949-968.

Botta, C, Gwenae«lle, I, Florence, C, Ire'ne, S, Jocelyne, P, Thierry, O, Jean Louis, B, Lefranc, A, Botta, PG & Michel, DM 2006, Assessment of occupational exposure to welding fumes by inductively coupled plasma-mass spectroscopy and by the alkaline comet assay. Environmental and Molecular Mutagenesis, 47: 284-295.

Brown, KL 1997, Environmental aspects of fume in air and water. Villepinte: International Institute of Welding Document; Doc. CV111:1804-97.

De Boeck, M, Touil, N, De Visscher, G, Vande, PA & Kirsch–
Volders, M 2000, Validation and implementation of an internal standard in
comet assay. Mutation Research, 469: 181-197

Erdely, A, Antonini, JM, Salmen Muniz, R, Liston, A, Hulderman, T, Simeonova, PP et al.  2012, Type I interferon and pattern recognition receptor signalling following particulate matter inhalation. Particle and Fibre Toxicology, 9: 25.

Golbabaei, F, Hassani, H, Ghahri, A, Arefian, S, Khadem, M, Hosseini, M & Dinari, B 2012, Risk assessment of exposure to gases released by welding processes in Iranian natural gas transmission pipelines industry. International Journal of Occupational Hygiene, 4: 6-9.

Gonser, M & Hogan, T 2011, Arc welding health effects, fume formation mechanisms, and characterization methods. InTech.

Iarmarcovai, G, Sari Minodier, I, Chaspoul, F, Botta, C, De Me´o, M, Orsie`re, TL, Berge´ Lefranc, J, Gallice, P & Botta, A 2005, Risk assessment of welders using analysis of eight metals by ICP-MS in blood and urine and DNA damage evaluation by the comet and micronucleus assays; influence of XRCC1 and XRCC3 polymorphisms. Mutagenesis, 20: 425-432.

Jilla, A 2019, Evaluation of total fume and heavy metal emission factors applicable to gas metal arc welding. University of New Orleans Theses and Dissertations.

Abdallah, KJ & Abdulhay, HS 2017, The adsorption of Cadmium and Lead Ions from aqueous solutions using non-living biomass of Phragmites australis. Iraqi Journal of Science, 58: 427-434.

Kathersan, D, Jiju, V, Elias, Sathiya, P & Noorul Hag, A 2012, Optimization using particle Swarn, Optimization algorithm. Procedia Engineering, 38: 3913-3926.

Kopeliovich, D 2012, Classification of welding processes: Substances and technologies, knowledge source on materials engineering. https://www.substech.com/dokuwiki/doku.php?id = classi ficatio n_of_welding_processes

Manikantan, P, Balachandar, V & Sasikala, K 2010, DNA damage in
workers occupationally exposed to lead, using comet assay.
International Journal of Biology, 2: 103.

Masoudi, M, Behzadi, F & Sakhaei, M 2019, Assessment of NO₂ levels as an air pollutant and its statistical modeling using meteorological parameters in Tehran, Iran. Caspian Journal of Environmental Sciences, 17: 227-236.

Matusiak, J & Wyciślik, A 2012, The influence of technological conditions on the emission of welding fume due to welding of stainless steels. Metalurgija (Metallurgy), 49: 307-311.

Mccarrick, S, Wei, Z, Moelijker, N, Derr, R, Hendriks, G, Wallinder, IO, Karlsson, L 2019, High variability in toxicity of welding fume nanoparticles from stainless steel in lung cells and reporter cell lines : the role of particle reactivity and solubility. Nanotoxicology, 13: 1293-1309.

McNeilly, JD, Heal, MR, Beverland, IJ, Howe, A, Gibson, MD & Hibbs, LR 2004, Soluble transition metals cause the pro-inflammatory effects of welding fumes in vitro. Toxicology and Applied Pharmacology, 196: 95-107.

Mert, T 2017, The analysis of the effect of parameters in gas metal arc welding of structural steel with metal-cored wire on welding fume using Taguchi method and ANOVA. Fresenius Environmental Bulletin, 26: 133-139.

Mistry 2015, Impact of welding processes on environment and health. International Journal of Advanced Research in Mechanical Engineering & Technology, 1: 17-20.

Nadzam. J, Armao, F, Byall, L, Kotecki, D & Miller, D 2014, Gas metal arc welding product and procedure selection. Lincoln global Inc.; Santa Fe Springs, CA, USA.

Norppa, H 2004, Cytogenetic biomarkers and genetic polymorphisms. Toxicology Letters, 149: 309-334.

Pires, I, Quintino, L, Miranda, R, Gomes, J 2006, Fume emissions during gas metal arc welding. Toxicological and Environmental Chemistry, 88: 85-94.

Sajedifar, J, Kokabi, AH, Dehghan, SF et al. 2018, Evaluation of operational parameters role on the emission of fumes. Industrial Health, 56: 198-206.

Spear, JE 2004, Welding fume and gas exposure. Magnolia, Texas, JE, Spear Consulting, LLC.

Welding guide 2020, EW-385 technical guide. Hobart institute of welding technology, 400 Trade square east, Troy, Ohio 453737.

Weman, K 2003, Welding processes handbook. Bington Hall, Abington Cambridge, England: Woodhead publishing Ltd and CRC Press LLC.