پیوندهای مفید
آمار
| تعداد نشریات | 31 |
| تعداد شماره‌ها | 708 |
| تعداد مقالات | 6,658 |
| تعداد مشاهده مقاله | 9,204,269 |
| تعداد دریافت فایل اصل مقاله | 6,316,016 |
Wind energy use possibility in LCTM circulation system of a machine-building enterprise | ||
| Caspian Journal of Environmental Sciences | ||
| دوره 18، شماره 5، اسفند 2020، صفحه 609-614 اصل مقاله (550.62 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22124/cjes.2020.4493 | ||
| نویسندگان | ||
| Bulat Faritovich Bairamov* ؛ Albert Rifovich Fardeev | ||
| Department of Mechanics and Design, Automotive Department, Naberezhnye Chelny Institute (branch), KFU, Russia | ||
| چکیده | ||
| In this paper, they considered the process of mechanical processing of parts, during which heat release occurs. High temperatures can lead to reduced tool life, reduced accuracy and processing quality. Therefore, lubricating and cooling technological means (LCTM) are supplied to the processing zone, which reduces friction forces and removes the released heat. LCTM used in machining for cooling and lubrication should be cleaned to a greater or lesser extent depending on the required fluid purity. The fluid temperature must be maintained at a constant level, if necessary. Otherwise, the accuracy of processing needed (surface cleanliness, dimensional stability) will not be achieved. Regeneration of LCTM occurs by their circulation through filters. Pumps are used to ensure circulation. The pumps are driven by electric motors that consume electricity. It is proposed to reduce the costs of LCTM provision by using cheap, environmentally friendly, safe types of energy in the process of circulation and building automatic control systems for LCTM circulation. One of the ways to get affordable energy is to use wind turbines. The article discusses the existing system of LCTM circulation and possible ways of wind energy use in it. The analysis of existing wind turbines and wind power plants has been carried out. The advantages and disadvantages of vane, rotary and orthogonal wind turbines are indicated. It is proposed to create a wind power plant that circulates liquid through filters, which can operate both from a wind engine and from a non-wind engine. | ||
| کلیدواژه‌ها | ||
| Lubricating and cooling technological means؛ Regeneration؛ Circulation؛ Energy؛ Control system | ||
| مراجع | ||
|
Adib, A, Oulapour, M & Chatroze, A 2018, Effects of wind velocity and soil characteristics on dust storm generation in Hawr-al-Azim Wetland, Southwest Iran, Caspian Journal of Environmental Sciences, 16: 333-347
Bairamov, FD, Bairamov, BF 2018, About hybrid system stability with distributed and concentrated parameters. HELIX, 8: 2493-2498.
Bairamov, FD, Mardamshin, IG 2008, Investigation of operation of hydraulic systems with wind pumping units", Russian Aeronautics, 51: 314-320.
Fardeev, AR, Abdullina, AM 2016, Joint operation of a hydraulically driven wind pump unit and a pipeline when the wind speed and the number of consumers are changed. Scientific and Technical Bulletin of the Volga Region, 1: 33-36.
Fardeev, AR, Bayramov, FD, Bayramov, BF 2015, Modernized system of lubricating and cooling technological means supply for metal cutting machines and research of its dynamics. Scientific and Technical Bulletin of the Volga Region, 5: 125-128.
Fardeev, AR, Fardeev, AA, Abdullina, AM 2017, The operation of the hydraulic valve of the manipulator, when they control technological processes of forging and hot stamping. Modern technologies in mechanical engineering: a collection of articles of the 21th International Scientific and Technical Conference, Penza, December 2017, ANOO "Privolzhsky House of Knowledge" – Penza, 28-32.
Gerashchenkova, T 2017. Approaches to the evaluation of the effectiveness of innovative development of the machine-building enterprise strategy. In: SHS Web of Conferences, EDP Sciences, Vol. 35, p. 01119.
Jagadevlah, TS, Smith, RT 1975, Generation schemes for wind power plants", paper presented in the 10th Intersociety Energy Conversion Engineering Conference (IECEC), Newark.: Delaware, August.
Krainev, AF 1987, Dictionary-reference book on mechanisms. Moscow, Mechanical Engineering, 560 p.
Kuznetsov, VP, Garina, EP, Romanovskaya, EV, Kuznetsova, SN and Andryashina, NS, 2018. Organizational design and rationalization of production systems of a machine-building enterprise (by the example of the contract assembly workshop). Espacios, 39: 25.
Lopota, AV, Tsyrkov, AV & Tsyrkov, GA 2017, Methods and tools of project-operational management of a machine-building enterprise. In 2017 International Conference on Quality Management, Transport and Information Security, Information Technologies (IT&QM&IS), IEEE, pp. 544-547.
Medvedev, S & Aksyonov, K 2020, Development of a method and decision support system for distributing orders of a machine-building enterprise. In IOP Conference Series: Materials Science and Engineering, IOP Publishing, Vol. 971, No. 4, p. 042097.
Nikitin, NN 1990, The course of theoretical mechanics. Moscow Higher School, 608 p.
Peiffer, K, Rouche, N 1969, Liapunov's second method applied to partial stability. Journal de Mécanique, 8: 323-334.
Sobhani, B and Safarianzengir, V 2020, Monitoring and prediction of drought using TIBI fuzzy index in Iran,
Caspian Journal of Environmental Sciences, 18: 237-250
Yoshizawa, T 1966, Stability theory by Lyapunov's second method. Tokyo: Mathematical Society of Japan, 223 p. | ||
|
آمار تعداد مشاهده مقاله: 593 تعداد دریافت فایل اصل مقاله: 511 |
||