ارزیابی مشخصات حالت تازه بتن های فراتوانمند حاوی مواد زودگیرکننده، زئولیت و سرباره و تأثیر آنها بر مشخصات مکانیکی و دوام بلندمدت

[1] Stein B., Kramer B., Kumar T., Pyle T., Shatnawi S., Rapid Strength Concrete for Rehabilitation and Improvement of Pavements, Compendium of Papers from the First International Conference on Pavement Preservation, 2010.

[2] Pezeshkian M., Delnavaz A., Delnavaz M., Development of UHPC mixtures using natural zeolite and glass sand as replacements of silica fume and quartz sand, European Journal of Environmental and Civil Engineering, Volume 25, 2021 - Issue 11.

Concrete, ASCE Journal of Materials in Civil Engineering, Volume 32 Issue 5 - May 2020

[3] Xiao R., Deng Z.C., Shen C., Properties of Ultra High-Performance Concrete Containing Superfine Cement and without Silica Fume, Journal of Advanced Concrete Technology, Volume 12 (2014) Issue 2.

[4] Bajaber M.A. & Hakeem I.Y., UHPC evolution, development, and utilization in construction: a review, Journal of Materials Research and Technology, Volume 10, January–February 2021, Pages 1058-1074.

[5] Yazıcı H., Yardımcı M.Y., Yiğiter H., Aydın S., Türkel S., Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag, Cement and Concrete Composites, Volume 32, Issue 8, September 2010, Pages 639-648.

[6] GORZELAŃCZYK T., HOŁA J., Pore structure of self-compacting concretes made using different superplasticizers, Archives of Civil and Mechanical Engineering, Volume 11, Issue 3, 2011, Pages 611-621.

[7] Wang X., Yu R., Song Q., Shui Z., Liu Z., Wu S., Hou D., Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density, Cement and Concrete Research, Volume 126, December 2019, 105921.

[8] Mosavinejad S.H.G., Mirgozar Langaroudi M.A., Barandoust J., Ghanizadeh A., Electrical and microstructural analysis of UHPC containing short PVA fibers, Construction and Building Materials, Volume 235, 28 February 2020, 117448

[9] ASTM C150-00, Standard Specification for Portland Cement.

[10] ASTM C1240-14, Standard Specification for Silica Fume Used in Cementitious Mixtures

[11] ASTM C494/C494M – 16, Standard Specification for Chemical Admixtures for Concrete.

[12] ASTM C109/C109M − 16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

[13] Soliman A.M., Nehdi M.L., Effect of partially hydrated cementitious materials and superabsorbent polymer on early-age shrinkage of UHPC, Construction and Building Materials, Volume 41, April 2013, Pages 270-275.

[14] An G.H., Park J.M., Cha S.L., Kim J.K., Development of a portable device and compensation method for the prediction of the adiabatic temperature rise of concrete, Construction and Building Materials, Volume 102, Part 1, 15 January 2016, Pages 640-647.

[15] Liu Z., El-Tawil S., Hansen W., Wang F., Effect of slag cement on the properties of ultra-high performance concrete, Construction and Building Materials, Volume 190, 30 November 2018, Pages 830-837.

[16] Viviani M., Lanzoni L., Savino V., Tarantino A.M., An Auto-Calibrating Semi-Adiabatic Calorimetric Methodology for Strength Prediction and Quality Control of Ordinary and Ultra-High-Performance Concretes, Materials 2022, 15, 96, 1-15.

[17] ASTM C191-13, Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle.

[18] BS EN 12390-3:2002, Testing hardened concrete - Part 3: Compressive strength of test specimens

[19] ASTM C348 – 14, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

[20] AASHTO TP 95, Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration.

[21] ASTM C642 – 13, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete.

[22] Wang D., Shi C., Wu Z., Xiao J., Huang Z., Fang Z., A review on ultra high performance concrete: Part II. Hydration, microstructure and properties, Construction and Building Materials, Volume 96, 15 October 2015, Pages 368-377.

[23] Han J., Wang K., Shi J., Wang Y., Influence of sodium aluminate on cement hydration and concrete properties, Construction and Building Materials, Volume 64, 2014, Pages 342-349.