The Influence of Impeller Design on Hydraulic Performance of Vortex Pump

[1] V. Kondus, P. Kalinichenko, and O. Gusak, “A method of designing of torque--Flow pump impeller with curvilinear blade profile,” Eastern-European Journal of Enterprise Technologies, vol. 3, no. 8–93, pp. 29–35, 2018.

[2] Y. Song, “Numerical investigation on vortex pump,” Technische Universitaet Berlin (Germany), 2021.

[3] H. Quan, Y. Guo, R. Li, Q. Su, and Y. Chai, “Optimization design and experimental study of vortex pump based on orthogonal test,” Science Progress., vol. 103, no. 1, pp. 1–20, 2020.

[4] M. Tan, K. Zhao, X. Wu, H. Liu, C. Shao, and B. Pan, “Analysis on flow structure in a vortex pump under all flow rates,” Water Supply, vol. 23, no. 5, pp. 1874–1884, 2023.

[5] A. Gerlach, P. U. Thamsen, S. Wulff, and C. B. Jacobsen, “Design parameters of vortex pumps: A meta-analysis of experimental studies,” Energies, vol. 10, no. 1, pp. 1–23, 2017.

[6] G. P. Schivley and J. I. Dussourd, “An Analytical and Experimental Study of a Vortex Pump,” Journal of Basic Engineering, vol. 92, no. 4, pp. 889–900, 1970.

[7] Ohba, H., Nakashima, Y. and Shiramoto, K., 1983. “A study on internal flow and performance of a vortex pump: part 1 theoretical analysis”. Bulletin of JSME, vol. 26, no. 216, pp.999-1006, 1983.

[8] A. Gerlach, P. U. Thamsen, and F. Lykholt-Ustrup, “Experimental investigation on the performance of a vortex pump using winglets,” In 16th international symposium on transport phenomena and dynamics of rotating machinery (ISROMAC), 2016.

[9] A. Gerlach, E. Preuss, P. U. Thamsen, and F. Lykholt-Ustrup, “Numerical simulations of the internal flow pattern of a vortex pump compared to the Hamel-Oseen vortex,” Journal of Mechanical Science and Technology, vol. 31, no. 4, pp. 1711–1719, 2017.

[10] A. Gerlach, S. Wulff, D. Perlitz, F. Lykholt-Ustrup, and P. U. Thamsen, “The optimal vortex pump impeller - An experimental study on clogging behaviour,” In 12th european conference on turbomachinery fluid dynamics and thermodynamics. european turbomachinery society, pp. 1–10, 2017.

[11] VM Lubieniecki, “Some performance characteristics of a centrifugal pump with recessed impeller,” In Proceedings of the Gas Turbine and Fluids Engineering Conference Products Show, San Francisco, CA, USA, pp. 26–30, 1972.

[12] Al-Obaidi, A.R, “Evaluation and investigation of hydraulic performance characteristics in an axial pump based on CFD and acoustic analysis”. Processes, vol. 12, no. 1, p.129, 2024.

[13] K. Rutschi, “Die Arbeitsweise von Freistrompumpen (The Operation Principle of Vortex Pumps),” Swiss Civil Engineering Journal, vol. 86, no. 32, pp. 575–582, 1968.

[14] Li, D., Zhang, N., Jiang, J., Gao, B., Alubokin, A.A., Zhou, W. and Shi, J., “Numerical investigation on the unsteady vortical structure and pressure pulsations of a centrifugal pump with the vaned diffuser”. International Journal of Heat and Fluid Flow, vol. 98, p.109050, 2022.

[15] Y. Li, G. Feng, X. Li, Q. Si, and Z. Zhu, “An experimental study on the cavitation vibration characteristics of a centrifugal pump at normal flow rate,” Journal of Mechanical Science and Technology, vol. 32, no. 10, pp. 4711–4720, 2018.

[16] Y. Y. Su, X. D. Wu, B. Xu, J. H. Feng, T. P. Zheng, and Y. Y. Liu, “Numerical Study on the Hysteresis Effect of Volute Pump with Stay Vanes Based on Vortex Dynamics,” In Journal of Physics: Conference Series, vol. 2752, no. 1, p. 012139, 2024.

[17] M. Y. Y. Sha, J. Wang, “Experimental study on internal flow and suction performance of a vortex pump,” Pump Technology, vol. 4, pp. 9–12, 2003.

[18] R. Liu, Q. Zhang, S. Zhuang, and K. Wang, “The Influence of the Geometric Parameters of an Impeller on the Transport Capability of Long Flexible Fiber in a Non-Clogging Pump,” Processes, vol. 12, no. 8, p. 1779, 2024.

[19] A. Gerlach, “The influence of impeller designs on the performance of a vortex pump,” Technische Universitaet Berlin (Germany), 2018.

[20] K. Zhao, M. Tan, X. Wu, C. Shao, and H. Liu, “Effect of impeller installation position on unsteady flow characteristics of a vortex pump,” Engineering Computations, vol. 40, no. 2, pp. 335–347, 2023.

[21] H. Quan, Y. Wu, Y. Guo, K. Song, and Y. Li, “Multiobjective hydraulic design and performance analysis of a vortex pump based on orthogonal tests,” Shock and Vibration, 2021.

[22] Gao, X., Zhao, T., Shi, W., Zhang, D., Shi, Y., Zhou, L. and Chang, H, “Numerical investigation of an open-design vortex pump with different blade wrap angles of impeller,” Processes, vol. 8, no. 12, pp. 1–19, 2020.

[23] Jiang, L., Wang, W., Shi, Y., Chen, J., Bai, L. and Zhou, L., “Vortex dynamics analysis of an energy loss mechanism in a centrifugal pump impeller”. Physics of Fluids, vol. 37, no. 2, p. 025164, 2025.

[24] Yang, J., Li, X., Cheng, D., Ji, J., Zhao, M., Guo, W. and He, L., “Numerical Simulation for Impeller Structure Optimization for Vortex Pump Based on Orthogonal Design Method”. Applied Sciences, vol. 15, no. 5, p.2265, 2025.

[25] Xin, L., Li, Q. and Liu, Y., “Dynamic analysis of the impeller under optimized blade design for a pump-turbine”. Journal of Energy Storage, vol. 107, p.114900, 2025.

[26] Gao, X., Shi, W., Zhao, R., Zhao, T. and Wang, H., 2021. “Optimization Design and Internal Flow Field Study of Open‐Design Vortex Pump”. Shock and Vibration, vol. 1, p. 6673200, 2021.

[27] Wilcox DC. “Turbulence Modeling for CFD”. DCW industries, La Canada. 1998.

[28] Menter, Florian R. “Review of the shear-stress transport turbulence model experience from an industrial perspective.” International journal of computational fluid dynamics, vol. 23, no. 4, pp. 305-316, 2009.