اثر پومیس، متاکائولین و ضایعات معدن مس بر روی بتن غلتکی ساخته شده با استفاده از سیمان‌های بومی منطقه سیستان و بلوچستان

[1] M. Ashkar, V. Toufigh, M. Ghaemian, and M. Azizmohammadi, “Application of ultrasonic models for investigating the properties of the interface between roller compacted concrete (RCC) layers,” NDT & E International, vol. 124, p. 102516, Dec. 2021, doi: 10.1016/J.NDTEINT.2021.102516.

[2] M. Hashemi, P. Shafigh, M. R. Bin Karim, and C. D. Atis, “The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement,” Constr Build Mater, vol. 169, pp. 553–566, Apr. 2018, doi: 10.1016/J.CONBUILDMAT.2018.02.216.

[3] P. Shafigh, M. Hashemi, B. H. Nam, and S. Koting, “Optimum moisture content in roller-compacted concrete pavement,” International Journal of Pavement Engineering, vol. 21, no. 14, pp. 1769–1779, Dec. 2020, doi: 10.1080/10298436.2019.1567919.

[4] A. Aghaeipour and M. Madhkhan, “Effect of Ground Granulated Blast Furnace Slag (GGBFS) on Mechanical Properties of Roller-Compacted Concrete Pavement,” J Test Eval, vol. 48, no. 4, pp. 2786–2802, Jul. 2020, doi: 10.1520/JTE20170786.

[5] A. R. Pourkhorshidi and A. A. Ramezanianpour, “Roller compacted concrete pavement using natural pozzolan: experimental investigation and salt-scaling durability model,” International Journal of Pavement Engineering, vol. 22, no. 12, pp. 1582–1591, Oct. 2021, doi: 10.1080/10298436.2019.1703982.

[6] L. Shen, Q. Li, W. Ge, and S. Xu, “The mechanical property and frost resistance of roller compacted concrete by mixing silica fume and limestone powder: Experimental study,” Constr Build Mater, vol. 239, p. 117882, Apr. 2020, doi: 10.1016/J.CONBUILDMAT.2019.117882.

[7] E. Rahmani, M. K. Sharbatdar, and M. H.A. Beygi, “Influence of cement contents on the fracture parameters of Roller compacted concrete pavement (RCCP),” Constr Build Mater, vol. 289, p. 123159, Jun. 2021, doi: 10.1016/J.CONBUILDMAT.2021.123159.

[10] F. Vahedifard, M. Nili, and C. L. Meehan, “Assessing the effects of supplementary cementitious materials on the performance of low-cement roller compacted concrete pavement,” Constr Build Mater, vol. 24, no. 12, pp. 2528–2535, Dec. 2010, doi: 10.1016/J.CONBUILDMAT.2010.06.003.

[11] C. Shi, C. Meyer, and A. Behnood, “Utilization of copper slag in cement and concrete,” Resour Conserv Recycl, vol. 52, no. 10, pp. 1115–1120, Aug. 2008, doi: 10.1016/J.RESCONREC.2008.06.008.

[12] I. Afshoon, M. Miri, and S. R. Mousavi, “Using the Response Surface Method and Artificial Neural Network to Estimate the Compressive Strength of Environmentally Friendly Concretes Containing Fine Copper Slag Aggregates,” Iranian Journal of Science and Technology - Transactions of Civil Engineering, pp. 1–15, Jun. 2023, doi: 10.1007/S40996-023-01152-4/METRICS.

[13] K. S. Al-Jabri, M. Hisada, A. H. Al-Saidy, and S. K. Al-Oraimi, “Performance of high strength concrete made with copper slag as a fine aggregate,” Constr Build Mater, vol. 23, no. 6, pp. 2132–2140, Jun. 2009, doi: 10.1016/J.CONBUILDMAT.2008.12.013.

[14] I. Afshoon, M. Miri, and S. R. Mousavi, “Evaluating the flexural behavior of green copper slag-contained steel fiber reinforced SCC beams with/without initial notches,” Constr Build Mater, vol. 395, p. 132316, Sep. 2023, doi: 10.1016/J.CONBUILDMAT.2023.132316.

[15] R. Sharma and R. A. Khan, “Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials,” J Clean Prod, vol. 151, pp. 179–192, May 2017, doi: 10.1016/J.JCLEPRO.2017.03.031.

[16] B. K. Chaitanya and I. S. Kumar, “Effect of waste copper slag as a substitute in cement and concrete-a review,” IOP Conf Ser Earth Environ Sci, vol. 982, no. 1, p. 012029, Mar. 2022, doi: 10.1088/1755-1315/982/1/012029.

[17] C. Shi, C. Meyer, and A. Behnood, “Utilization of copper slag in cement and concrete,” Resour Conserv Recycl, vol. 52, no. 10, pp. 1115–1120, Aug. 2008, doi: 10.1016/J.RESCONREC.2008.06.008.

[18] M. Adamu, B. S. Mohammed, N. Shafiq, and M. Shahir Liew, “Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement,” Cogent Eng, vol. 5, no. 1, Jan. 2018, doi: 10.1080/23311916.2018.1436027.

[19] D. Tavakoli, R. Sakenian Dehkordi, H. Divandari, and J. de Brito, “Properties of roller-compacted concrete pavement containing waste aggregates and nano SiO2,” Constr Build Mater, vol. 249, p. 118747, Jul. 2020, doi: 10.1016/J.CONBUILDMAT.2020.118747.

[20] A. M. Ashteyat, Y. S. Al Rjoub, Y. Murad, and S. Asaad, “Mechanical and durability behaviour of roller-compacted concrete containing white cement by pass dust and polypropylene fibre,” European Journal of Environmental and Civil Engineering, vol. 26, no. 1, pp. 166–183, 2022, doi: 10.1080/19648189.2019.1652694.

[21] A. M. Ashteyat, Y. S. Al Rjoub, A. T. Obaidat, M. Kirgiz, M. Abdel-Jaber, and A. Smadi, “Roller Compacted Concrete with Oil Shale Ash as a Replacement of Cement: Mechanical and Durability Behavior,” International Journal of Pavement Research and Technology, vol. 17, no. 1, pp. 151–168, Jan. 2022, doi: 10.1007/S42947-022-00225-3/METRICS.

[22] M. H. Yaseen, S. F. S. Hashim, E. T. Dawood, and M. A. M. Johari, “Mechanical properties and microstructure of roller compacted concrete incorporating brick powder, glass powder, and steel slag,” J Mech Behav Mater, vol. 33, no. 1, Jan. 2024, doi: 10.1515/JMBM-2022-0307/MACHINEREADABLECITATION/RIS.

[23] G. Bagherinezhad, “Effect of Aggregates Quality on RCC‎,” Master’s thesis, University of Sistan and Baluchestan, Zahedan, 2014.

[24] ASTM C150, Standard Specification for Portland Cement, ASTM International. 2009.

[25] ASTM C 1435, Standard Practice For Molding Roller Compacted Concrete in Cylinder Molds Using a Vibrating Hammer, Annual Book of ASTM. 2014.

[26] A. Omran, D. Harbec, A. Tagnit-Hamou, and R. Gagne, “Production of roller-compacted concrete using glass powder: Field study,” Constr Build Mater, vol. 133, pp. 450–458, Feb. 2017, doi: 10.1016/J.CONBUILDMAT.2016.12.099.

[27] M. AliAhmad, M. Miri, and M. Rashki, “Probabilistic and experimental investigating the effect of pozzolan and Lumachelle fine aggregates on roller compacted concrete properties,” Constr Build Mater, vol. 151, pp. 755–766, Oct. 2017, doi: 10.1016/J.CONBUILDMAT.2017.06.107.

[28] ASTM C192/C192M, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory,” ASTM International, 2009.

[29] ACI 325.10R, Report on Roller-Compacted Concrete Pavement, ACI Committee. 2021.

[30] ACI 207.5R-11, “Guide for Roller-Compacted Mass Concrete,” American Concrete Institute (ACI)-Committee 207, 2011.

[31] ASTM C 39, Standard test method for compressive strength of cylindrical concrete specimens, Annual Book of ASTM. 1997.

[32] ASTM C 496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International. 2011.

[33] ASTM C 293, Standard Test Method for Flexural Strength of Concrete (using Simple Beam with Third-point Loading), ASTM International. 2016.

[34] DIN 1048-5, Testing Methods for Concrete, Tests on Hardened. 1991.

[35] J. Esmaeili and H. Aslani, “Use of copper mine tailing in concrete: strength characteristics and durability performance,” J Mater Cycles Waste Manag, vol. 21, no. 3, pp. 729–741, May 2019, doi: 10.1007/S10163-019-00831-7/METRICS.

[36] J. Esmaili and H. Aslani, “A Study on the Mechanical Properties of Concrete Containing Copper Mine Tailing,” Concrete Research, vol. 12, no. 3, pp. 61–71, Sep. 2019, doi: