- Ying, L. and A. Vrouwenvelder, Service life prediction and repair of concrete structures with spatial variability. Heron, 52 (4), 2007.
- Hosseini, S.A., Probabilistic Calculation of the Corrosion Initiation of steel reinforcement Using Reliability Methods. Concrete Research, 2019. 12(3): p. 137-145.
- Chen, S., et al., Life-cycle modelling of concrete cracking and reinforcement corrosion in concrete bridges: A case study. Engineering Structures, 2021. 237: p. 112143.
- Zhang, L., et al., Corrosion rate models of reinforcement in modified coral aggregate concrete. Construction and Building Materials, 2021. 288: p. 123099.
- James, A., et al., Rebar corrosion detection, protection, and rehabilitation of reinforced concrete structures in coastal environments: A review. Construction and Building Materials, 2019. 224: p. 1026-1039.
- ACI308R-16, Guide to External Curing of Concrete. 2016, American Concrete Institute Farmington Hills, Mich.
- Regulations, O.o.N.B., Part 9 of National Regulations: Design and implementation of reinforced concrete buildings. 2014, Toseeh Iran: Tehran.
- Bhargava, K., et al., Modeling of time to corrosion-induced cover cracking in reinforced concrete structures. Cement and Concrete Research, 2005. 35(11): p. 2203-2218.
- Alexander, M. and H. Beushausen, Durability, service life prediction, and modelling for reinforced concrete structures–review and critique. Cement and Concrete Research, 2019. 122: p. 17-29.
- Van Beek, A., et al. Validation model for service life prediction of concrete structures. in 2nd International RILEM workshop on life prediction and aging management of concrete structures, Paris, France. 2003.
- Markeset, G. and M. Kioumarsi, Need for further development in service life modelling of concrete structures in chloride environment. Procedia engineering, 2017. 171: p. 549-556.
- Song, H.-W., et al., A micro-mechanics based corrosion model for predicting the service life of reinforced concrete structures. International Journal of Electrochemical Science, 2007. 2: p. 341-354.
- Safehian, M. and A.A. Ramezanianpour, Assessment of service life models for determination of chloride penetration into silica fume concrete in the severe marine environmental condition. Construction and Building Materials, 2013. 48: p. 287-294.
- Pang, L. and Q. Li, Service life prediction of RC structures in marine environment using long term chloride ingress data: Comparison between exposure trials and real structure surveys. Construction and Building Materials, 2016. 113: p. 979-987.
- Lin, G., Y. Liu, and Z. Xiang, Numerical modeling for predicting service life of reinforced concrete structures exposed to chloride environments. Cement and concrete composites, 2010. 32(8): p. 571-579.
- Ožbolt, J., G. Balabanić, and M. Kušter, 3D Numerical modelling of steel corrosion in concrete structures. Corrosion science, 2011. 53(12): p. 4166-4177.
- Yang, C., L. Li, and J. Li, Service life of reinforced concrete seawalls suffering from chloride attack: Theoretical modelling and analysis. Construction and Building Materials, 2020. 263: p. 120172.
- Khatri, R. and V. Sirivivatnanon, Characteristic service life for concrete exposed to marine environments. Cement and concrete research, 2004. 34(5): p. 745-752.
- Rodriguez, J., L. Ortega, and J. Casal, Load carrying capacity of concrete structures with corroded reinforcement. Construction and building materials, 1997. 11(4): p. 239-248.
- Andrade, C., J. Sarria, and C. Alonso, Corrosion Rate Field Monitoring of Post – Tensioned Tendons in Contact with Chlorides. Durability of Building Materials and Components, 1996. 2: p. 959–967.
- Bhargava, K., et al., Ultimate flexural and shear capacity of concrete beams with corroded reinforcement. Structural Engineering and Mechanics, 2007. 27(3): p. 347-363.
- Vu, K.A. and M.G. Stewart, Predicting the likelihood and extent of reinforced concrete corrosion-induced cracking. Journal of structural engineering, 2005. 131(11): p. 1681-1689.
- Khan, I., R. François, and A. Castel, Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams. Cement and concrete research, 2014. 56: p. 84-96.
- Thoft-Christensen, P., Corrosion and cracking of reinforced concrete, in Life-Cycle Performance of Deteriorating Structures: Assessment, Design and Management. 2004. p. 26-36.
- Vidal, T., A. Castel, and R. François, Analyzing crack width to predict corrosion in reinforced concrete. Cement and concrete research, 2004. 34(1): p. 165-174.
- Nowak, A.S. and K.R. Collins, Reliability of structures. 2012: CRC Press.
- Zhao, Y., Y. Wang, and J. Dong, Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion. Journal of Structural Engineering, 2020. 146(6): p. 04020098.
- Hariche, L., et al., Effects of reinforcement configuration and sustained load on the behaviour of reinforced concrete beams affected by reinforcing steel corrosion. Cement and Concrete Composites, 2012. 34(10): p. 1202-1209.
29. Malumbela, G., P. Moyo, and M. Alexander, Structural behaviour of beams under simultaneous load and steel corrosion, in Concrete Repair, Rehabilitation and Retrofitting II. 2008, CRC Press. p. 271-272.
|
