بررسی تأثیر الیاف فورتا و پلی پروپلین بر مقاومت فشاری، شکل‌پذیری و جذب انرژی نمونه‌های استوانه‌ای بتنی

[1] Foti, D., Innovative techniques for concrete reinforcement with polymers. Construction and Building Materials, 2016. 112: p. 202-209.

[2] Kosmatka, S.H., W.C. Panarese, and B. Kerkhoff, Design and control of concrete mixtures. 2002.

[3] Mehta, P.K., and P.J., Monteiro, Concrete: microstructure, properties, and materials. Vol. 3. 2006: McGraw-Hill New York.

[4] Edgington, J., Hannant, D., and Williams, R., Steel fiber reinforced concrete. Fiber reinforced materials, The Construction Press, Lancaster, England, 1978: p. 112-128.

[5] Zeiml, M., et al., How do polypropylene fibers improve the spalling behavior of in-situ concrete? Cement and concrete research, 2006. 36(5): p. 929-942.

[6] Banthia, N., and Gupta, R., Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete. Cement and concrete Research, 2006. 36(7): p. 1263-1267.

[7] Zhang, P., and Li, Q.-f., Experiment and study on tensile strength of polypropylene fiber reinforced cement stabilized macadam. Highway, 2008. 4: p. 175-179.

[8] Arafa, M., Alqedra, M., and Almassri, H., Effect of Forta-Ferro Fibers on Fresh and Mechanical Properties of Ultra High Performance Self Compacting Concrete. International Journal of Engineering and Technology Research, 2013. 1(7): p. 43-47.

[9] Hasan-Nattaj, F., and Nematzadeh, M., The effect of forta-ferro and steel fibers on mechanical properties of high-strength concrete with and without silica fume and nano-silica. Construction and Building Materials, 2017. 137: p. 557-572.

[10] Dashti, J., and Nematzadeh, M., Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design, Construction and Building Materials, 2020, 253,  118999

[11] Bhogonea, M.V., and Subramaniam K.V.L., Early-age tensile constitutive relationships for steel and polypropylene fiber reinforced concrete, Engineering Fracture Mechanics, 244, 2021, 107556

[12] Guo, H., Jiang, L., Tao, J., Chen, Y., Zheng, Z., Jia, B., Influence of a hybrid combination of steel and polypropylene fibers on concrete toughness, Construction and Building Materials, 275, 2021, 122132

[13] Wood, S.L., Evaluation of the long-term properties of concrete. Materials Journal, 1992. 88(6): p. 630-643.

[14] Mesbah, H.A., Lachemi, M., and Aitcin, P.-C., Determination of elastic properties of high-performance concrete at early ages. Materials Journal, 2002. 99(1): p. 37-41.

[15] Yu, R., Spiesz, P., and Brouwers, H., Energy absorption capacity of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) in quasi-static mode and under high velocity projectile impact. Cement and Concrete Composites, 2016. 68: p. 109-122.

[16] Booker, P.M., et al., Investigation on the response of segmented concrete targets to projectile impacts. International Journal of Impact Engineering, 2009. 36(7): p. 926-939.

[17] Mehta, P.K., Concrete. Structure, properties and materials. 1986.

[18] Bruck, P., Esselman, T., and Fallin, M., Digital image correlation for nuclear. Nuclear Engineering International, 2012. 57(693): p. 28-31.

[19] Bruck, H., et al., Digital image correlation using Newton-Raphson method of partial differential correction. Experimental mechanics, 1989. 29(3): p. 261-267.

[20] Vendroux, G., and Knauss, W., Submicron deformation field measurements: Part 2. Improved digital image correlation. Experimental Mechanics, 1998. 38(2): p. 86-92.

[21] Schmidt, T., Tyson, J., and Galanulis, K., Full‐field dynamic displacement and strain measurement using advanced 3d image correlation photogrammetry: part 1. Experimental Techniques, 2003. 27(3): p. 47-50.

[22] Schmidt, T., Tyson, J., and Galanulis, K., Full‐field dynamic displacement and strain measurement‐specific examples using advanced 3D image correlation. Experimental Techniques, 2003. 27(4): p. 22-26.

[23] Mott, L., Shaler, S.M., and Groom, L.H., A technique to measure strain distributions in single wood pulp fibers. Wood and Fiber Science, 2007. 28(4): p. 429-437.

[24] Muszyñski, L., Lagana, R., and Shaler, S., Optical measurements of wood deformations in changing climate. in Actes du SEM IX International Congress on Experimental Mechanics, tenu à Milwaukee, USA, du. 2002.

[25] Muszyński, L., Wang, F., and Shaler, S.M., Short-term creep tests on phenol-resorcinol-formaldehyde (PRF) resin undergoing moisture content changes. Wood and Fiber Science, 2007. 34(4): p. 612-624.

[26] Muszynski, L., Lopez-Anido, R., and Shaler, S.M., Image correlation analysis applied to measurement of shear strains in laminated composites. in SEM IX International Congress on Experimental Mechanics. 2000.

[27] Melrose, P.T., Lopez-Anido, R., and Muszynski, L., Elastic properties of sandwich composite panels using 3-D digital image correlation with the hydromat test system. 2004, University of Maine.

[28] Choi, S., and Shah, S., Measurement of deformations on concrete subjected to compression using image correlation. Experimental Mechanics, 1997. 37(3): p. 307-313.

[30] Alhozaimy, A.M.,  Soroushian, P., Mirza, F., Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials, Cement and Concrete Composites, 1996. 18(2): p. 85-92.