مطالعه تأثیر نوع و مقدار پوزولان بر چسبندگی بتن خودتراکم سبک حاوی لیکا با استفاده از روش پوش اوت

[1] Dawei Zhang, Tamon Ueda, Hitoshi Furuuchi, (2011), “Avereage crack spacing of overlay-strengthened RC beams”, Journal of materials in civil engineering, ASCE, October .

[2] N. Banthia, R. Gupta, S. Mindess, (2006), “Development of fiber reinforced concrete repair materials”, Can. J. Civ. Eng., 33, 126-133

[3] Y. Theiner, G. Hofstetter, (2012), “Evaluation of the effects of drying shrinkage on the behavior of concrete structures strengthened by overlays”, Cem. and Conc. Res., 42, 1286-1297

[4] Laurence, O., Bissonnette, B., Pigeon, M., and Rossi, P., (2000), “Effect of steel macro fibres on cracking of thin concrete repairs". In Proceedings, 5th International RILEM Symposium on FibreReinforced Concretes (BEFIB 2000), Lyon, France, pp. 213–222.

[5] Naderi, M., Ghodousian, O., (2010), “Assessing the Adhesion of Self-Compacting Concrete and Mortar Applied to Different Concrete surfaces, using twist-off and Friction-Transfer Methods, and its Estimation By Fuzzy Logic”, Journal of Civil Engineering, Ferdowsi Mashhad, Vol 23 NO 1.[ In Persian]

[6] Pedro Miguel Duarte Santos and Eduardo Nuno Brito Santos Júlio., (2011), "Factors Affecting Bond between New and Old Concrete" ACI Materials Journal/July-August .

[7] W.Hansen, J.A. Almudaiheem, (1987), “Ultimate drying shrinkage of concrete – influence of major parameters”, ACI Mater. J., 84, 217-223

[8] O. Challal, B. Benmokrane, G. Ballavy, (1992), “Drying shrinkage strains: experimental versus codes, ACI Mater. J., 89, 263-266

[9] ACI committee 209, (1982), “Pridiction of creep, Shrinkage and temperature effects in concrete structures, designing for creep and shrinkage in concrete structures”, SP-76, American concrete institute, Detroit, 193-300

[10] Euro-Internatioinale du beton, (1978), “Model code for concrete structures”, Paris.

[11] B. Bissonnette, P. Pierre, M. Pigeon, (1999), “ Influence of key parameters on drying shrinkage of cementitious materials”, cement and concrete research, 29, 1655-1662

[12] V. Baroghel-Bouny, M. Mainguy, T. Lassabatere, O. Coussy, (1999), “Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials”, Cement and concrete research, 29, 1225-1238

[13] Tianxiong Guo, Yuchen Xie, Xingzhong Weng, (2018) “Evaluation of the bond strength of a novel concrete for rapid patch repair of pavements”, Construction and Building Materials, 186 ,790–800.

[14] F. Ascione, M. Lamberti, A. Napoli, A.G. Razaqpur , R. Realfonzo, (2019), “Modeling SRP-concrete interfacial bond behavior and strength”, Engineering Structures 187 , 220–230.

[15] Luc Courard , Tomasz Piotrowski, Andrzej Garbacz, (2014), “Near-to-surface properties affecting bond strength in concrete repair”, Cement & Concrete Composites 46 ,  73–80.

[16] Bing Wang, Shilang Xu , Fei Liu , (2016), “Evaluation of tensile bonding strength between UHTCC repair materials and concrete substrate”, Construction and Building Materials 112 , 595–606.

[17] S.H. Abo Sabah, M.H. Hassan, N. Muhamad Bunnori, M.A. Megat Johari , (2019) , “Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay” , Construction and Building Materials 216 ,  261–271.

[18] ASTM C33, (2005),  Srandard Specification for Concrete Aggregates.

[19] ASTM C330, (2004), “Standard specification for lightweight aggregates for structural concrete”, Annual Book of ASTM Standards, Volume 04.02;.

[20] EFNARC, “The European guidelines for self-compacting concrete, specification, production and use”, May 2005.