- 1. Amiri, M. and M. Aryanpour, The effect of high temperatures on concrete performance with a view to the changes in the C-S-H nanostructure. Concrete Research, 2020. article in press.
- 2. Tian, Q. S. Nakama, and K. Sasaki, Immobilization of cesium in fly ash-silica fume based geopolymers with different Si/Al molar ratios. Science of the total environment, 2019. 687: p. 1127-1137.
- 3. Crozier, D. and J. Sanjayan, Chemical and physical degradation of concrete at elevated temperatures. Concrete in Australia, 1999. 25 (1): 18-20.
- 4. Hertz, K.D. Concrete strength for fire safety design. Magazine of Concrete Research, 2005. 57(8): p. 445-453.
- 5. Bellmann, F. T. Sowoidnich, H.M. Ludwig, and D. Damidot, Dissolution rates during the early hydration of tricalcium silicate. Cement and Concrete Research, 2015. 72: p. 108-116.
- 6. Tan, H. M. Li, J. Ren, X. Deng, X. Zhang, K. Nie, J. Zhang, and Z. Yu, Effect of aluminum sulfate on the hydration of tricalcium silicate. Construction and Building Materials, 2019. 205: 414-424.
- 7. Chen, J.J. J.J. Thomas, H.F. Taylor, and H.M. Jennings, Solubility and structure of calcium silicate hydrate. Cement and concrete research, 2004. 34(9): p. 1499-1519.
- 8. Kunther, W. S. Ferreiro, and J. Skibsted, Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders. Journal of Materials Chemistry A, 2017. 5(33): p. 17401-17412.
- 9. Arioz, O. Effects of elevated temperatures on properties of concrete. Fire safety journal, 2007. 42(8): p. 516-522.
- 10. Mahinroosta, M. and A. Allahverdi, Hazardous aluminum dross characterization and recycling strategies: A critical review. Journal of environmental management, 2018. 223: p. 452-468.
- 11. Li, Z. L. Li, J. Wang, and X. Wu, Effect of Elevated Temperature on Meso-and Micro-Structure and Compressive Strength of High-Strength Concrete and Mortar Containing Blast-Furnace Slag. Journal of Advanced Concrete Technology, 2018. 16(10): p. 498-511.
- 12. SatishReddy, M and Neeraja, D, Mechanical and durability aspects of concrete incorporating secondary aluminium slag. Resource-Efficient Technologies, 2017. 4(2): p. 225-232.
- 13. bahmani, h. and D. Mostofinejad, Mechanical properties of ultra high performance concrete reinforced by polypropylene fibers and synthetic macro fibers (barchip). concrete Research, 2019. 12(1): p. 15-26.
- 14. mousavi, s. and F. Gharedaghi Effect of Carbon Nanotube and Silica Aerogel on Compressive Strength, Durability and Thermal Conductivity of Concrete. Concrete Research, 2019. 12(1): p. 71-79.
- 15. Berenjian, J. N. Tila, M.J. Taheri Amiri, and A. Ashrafian, Investigating the Effect of High Temperatures on Long-term Compressive Strength of Self-Compacting Concrete Containing Powdery Binary Admixtures. Concrete Research, 2018. 11(1): p. 119-128.
- 16. Alomayri, T. Experimental study of the microstructural and mechanical properties of geopolymer paste with nano material (Al2O3). Journal of Building Engineering, 2019. 25: p. 100788.
- 17. ASTM, American Society for Testing and Materials. 1984.
- 18. Taylor, P.C. S.H. Kosmatka, and G.F. Voigt, Integrated materials and construction practices for concrete pavement: A state-of-the-practice manual. 2006.
- 19. Grattan-Bellew, P. Microstructural investigation of deteriorated Portland cement concretes. Construction and building materials, 1996. 10(1): p. 3-16.
- 20. Geng, H. and Q. Li, RETRACTED: Development of microstructure and chemical composition of hydration products of slag activated by ordinary Portland cement. 2014, Elsevier.
- 21. Escalante-Garcia, J.I. and J. Sharp, The chemical composition and microstructure of hydration products in blended cements. Cement and Concrete Composites, 2004. 26(8): p. 967-976.
- 22. Tarighat, A. and y. modarres, Thermodynamic modeling of sulfate attack on hardened cement paste containing slag and investigation of the effect of various sulfate solutions. 2017.
- 23. Raki, L. J. Beaudoin, R. Alizadeh, J. Makar, and T. Sato, Cement and concrete nanoscience and nanotechnology. Materials, 2010. 3(2): p. 918-942.
- 24. Gollop, R. and H. Taylor, Microstructural and microanalytical studies of sulfate attack. V. Comparison of different slag blends. Cement and Concrete Research, 1996. 26(7): 1029-1044.
- 25. Khaliq, W. and V. Kodur, Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures. Cement and Concrete Research, 2011. 41(11): p. 1112-1122.
- 26. Fares, H. A. Noumowe, and S. Remond, Self-consolidating concrete subjected to high temperature: mechanical and physicochemical properties. Cement and Concrete Research, 2009. 39(12): p. 1230-1238.
27. Brindley, G. Thermal transformations of clays and layer silicates. in Proceedings of International Clay Conference. 1975. Applied Publishing Ltd. Wilmette, Illinois, USA.
|
